水泥電桿在運輸和施工中開裂的原因，主要因為水泥電線桿強度不夠，質量過差導致水泥電線桿開裂，在運輸中出現壓碎和順向開裂都是因為生產水泥電線桿采用了劣質的原材料導致。在對水泥電線桿施工過程中經常出現開裂和破損現象，很多種原因導致水泥電線桿破損，主要原因還是質量不合格導致水泥電線桿破損，在生產水泥電線桿時為了節省成本減少水泥和鋼筋導致強度過低導致破碎。

The main reasons for the cracking of cement pole in transportation and construction are that the strength of cement pole is not enough and the quality of cement pole is too poor, which leads to the cracking of cement pole. Crushing and forward cracking in transportation are caused by the poor raw materials used in the production of cement pole. Cracking and breakage often occur during the construction of cement wire rod. Many reasons lead to the breakage of cement wire rod. The main reason is that the quality of cement wire rod is not up to standard. In order to save cost and reduce the strength of cement and steel bar, too low leads to breakage.

影響水泥電桿破損原因

Reasons for Damage of Cement Pole

一，水泥使用量少，降低混凝土的強度導致水泥電線桿破碎。

First, the use of cement is small, reducing the strength of concrete leads to the breakage of cement wire pole.

二，減少外環筋，導致水泥電線桿順向開裂。

Second, reduce the external ring reinforcement, leading to the cement pole cracking in the direction.

三，主筋減少使用量容易導致水泥電線桿縱向斷裂。

Thirdly, the reduction of main reinforcement tendons can easily lead to the longitudinal fracture of cement poles.

四，采用劣質的砂石料，人工沙和較差的石子，不達標的水泥都會導致水泥電線桿開裂。

Fourth, the use of inferior sand and gravel, artificial sand and poor stone, not up to the standard cement will lead to cement pole cracking.